Onicon F-2600 Bedienungsanleitung PDF herunterladen (Seite 14)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page 14

1.2.2 Vortex Shedding Frequency

Von Karman vortices form downstream of a shedder bar into two distinct wakes.

The vortices of one wake rotate clockwise while those of the other wake rotate

counterclockwise. Vortices generate one at a time, alternating from the left side to the right

side of the shedder bar. Vortices interact with their surrounding space by over-powering

every other nearby swirl on the verge of development. Close to the shedder bar, the

distance (or wave length) between vortices is always constant and measurable. Therefore,

the volume encompassed by each vortex remains constant, as shown below. By sensing

the number of vortices passing by the velocity sensor, the F-2600 & F-2700 Flow Meter

computes the total uid volume.

Figure 2. Measurement Principle of Vortex Flow Meters

1.2.3 Vortex Frequency Sensing

The velocity sensor incorporates a piezoelectric element that senses the vortex frequency.

This element detects the alternating lift forces produced by the Von Karman vortices

owing downstream of the vortex shedder bar. The alternating electric charge generated by

the piezoelectric elements is processed by the transmitter’s electronic circuit to obtain the

vortex shedding frequency. The piezoelectric element is highly sensitive and operates over

a wide range of ows, pressures and temperatures.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 130 131

Keine Kommentare

Onicon F-2600 Bedienungsanleitung Seite 14