Onicon F-5200 Insertion Bedienungsanleitung PDF herunterladen (Seite 23)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-5200 Insertion Thermal Mass Flow Meter Manual 05/14 - 0756-8 / 19475 Page 23

4.3 START-UP & COMMISSIONING WORKSHEET

Please read all installation instructions carefully prior to proceeding with these steps. Use the

following worksheet for checking off the commissioning steps and recording measured values.

STEP TEST/MEASUREMENT S/N: S/N: S/N: S/N:

1. Meter location:

2. Conrm pipe size:

3. Insertion depth

and orientation:

4. Control system

programming:

5. Match display

serial number

(S/N) if ordered:

6. Signal connections

veried:

7. Supply voltage veried:

8. Connect power:

The following steps require ow in the pipe. Flow signal readings should be taken while holding the

ow rate constant, if possible. Otherwise, take the various output readings as quickly as possilbe.

9. Analog or pulse

output(s)

4 - 20 mA signal:

Scaled output interval:

Calculated ow rate:

__________mA

____________

_______SCFH

__________mA

____________

_______SCFH

__________mA

____________

_______SCFH

__________mA

____________

_______SCFH

10. Flow rate displayed by

control system: _______SCFH _______SCFH _______SCFH _______SCFH

1 2 ... 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

Onicon F-5200 Insertion Bedienungsanleitung Seite 23